75mm 89mm Economic More Profiles Light Steel Frame Machine For
House Structure
1. Technical Parameter
Stud Track Roll Forming Machine |
No. | Item | Specification |
1 | Suitable material | Type:Galvanized Coil, PPGI |
|
| Thickness(mm):0.5-1.2mm, G350Mpa-G550Mpa |
2 | Forming speed(m/min) | 8-12 |
3 | Forming station | 13 |
4 | Decoiler | Electric decoiler or hydraulic decoiler |
5 | Main machine motor | China Famous brand |
6 | PLC brand | Delta |
7 | Driving system | Chain drive |
8 | Rollers’ materail | Gcr15 steel |
9 | Station structure | Wall panel station |
10 | Punching system | Yes |
11 | Cutting system | Hydraulic stop cutting |
12 | Power supply requirement | 380V 50HZ or customized |
13 | Machine color | Customized |
| 14 | Servo feeder | Yes |
2. Machine Components
| 3 tons electric decoiler | 1 set |
| Servo feeder | 1 set |
| Hydraulic punching device | 1 set |
| Roll forming machine | 1 set |
| Hydraulic station | 1 set |
| Electric Control box system | 1 unit |
| 4 Meters Passive out table | 1 unit |
3. Application
1. Supermarket, marketplace
2. Hotel, restaurant,railway station
3. commercial building
4. Underground, air port, bus station
5. Building lobby,metro station
4. Working flow
Decoiler--servo feeding- hydraulic punching for the holes and
notch--roll forming-- hydraulic cutting- out put tables
5. Machine Maintenance
Daily maintenance with meticulous care plays an important part in
extension the equipments’ operation time and the quality of rolling
plank. Therefore, please do the following things in your daily
1.The hydraulic tank must be filled with 32# or 46# hydraulic oil
before using. The amount of oil is subject to the oil mark
2. Add and daub lube often to the outside parts. (Such as driving
chain,Scissors, gears, rollers, )
3. Wipe the surface dust of roller often and particularly work
outside. If you do not use it for long time ,you should daub
machine and lube in the roller surface and you need clean it when
you use next time.
4. If the equipment does not use for long time, you should use
plastics cloth or other articles to cover it and notice to avoid
rain and damp, especially electrical controlling box
5. Cutting device should add lube to the places where need lube to
the request
6. Usually look into hydraulic station and the oil quantity of
deceleration machine, you should add in time when oil quantity
shortage
7. Electrical components should be guaranteed to work in a dry
environment, such as damp. Rain should continue to work after
drying.
6.Machine picture
Light steel frame machine is to make the house frame, it is not
with vertex software, but it is competitive and economic one, it is
used to plaster board, gypsum board and other decorative finishes
lightweight board. Products made by this machine are suitable to
use in hotels, theaters, shopping malls, factories, office
buildings, old building renovation, interior decoration settings,
roof and other places.
Material for this machine is galvanized steel plate, snowflake
plate and cold steel plate,we can according to customer design,
manufacture different specifications of cold-formed.
