Hydraulic Punching C Channel Cold Roll Forming Machine 3 Ton Manual Decoiler

Technical Parameter

1.Hydraulic decoiler

• Forming thickness: 1.5-2.2 mm,galvanized coils yield strength≤G250MPa
• working speed: 12M/min(not include cutting and punching stop time)
• Hydraulic punching device: 1 set
• Notching device: 1 set
• roller stations: about 13 stations
• material of roller: bearing steel, quenching treatment.
• material of main shaft: 45# fine steel,
• diameter of main axis: ￠75mm
• main motor power: 7.5kW
• motor power of hydraulic station: 5.5 KW
• hydraulic station pressure: 12MPa
• electric control system: whole line adopted PLC control, Panasonic PLC
• cutting type: hydraulic drive, cut after forming
• material of cutting blade: Cr12mov quenching process

2. Working Flow

Uncoiling- infeed guiding-levelling- punching-roll forming- hydraulic cutting- output table- spare parts for reference

3. Main Structure and Characters

This channel machine is composed by 3T passive uncoiler, punching station, main forming machine, cutting unit, hydraulic station, control cabinet, output table.

4. Profile

5. Machine Photo

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.